HOW TO: Configuring your network in Windows

Since we do not offer DHCP services at this time, you will need to manually configure your IP address for your KVM VPS. Here's a guide for setting up IPv4 in a Windows OS using the virtio drivers (IPv6 can be configured the same way).
  1. Navigate to the IPv4 tab in Wyvern and make note of your VPSs IP and the gateway listed. At this time all subnet masks are 255.255.255.0.
  2. Open Device Manager and locate an object called "Ethernet Controller" with a yellow exclamation point next to it.
  3. Right-click that object and click on "Update Driver Software...".
  4. Click on "Browse my computer for driver software".
  5. Browse to or enter "A:\amd64" if you still have your Windows ISO mounted, if not you can mount the "Windows virtio drivers" ISO (requires a Start and Stop of the VPS) and navigate to the amd64 folder on the CD drive instead.
  6. Make sure the box for "Include subdirectories" is checked and click the "Next" button.
  7. Check "Always trust software from Red Hat, Inc." and click the "Install" button.
  8. If it installed correctly you'll be able to edit your network adapter properties and configure your IPs manually which is pretty straight forward (images below).






  • 1 Bu dökümanı faydalı bulan kullanıcılar:
Bu cevap yeterince yardımcı oldu mu?

İlgili diğer dökümanlar

Wyvern Configuration Page (KVM)

VPS Identifier - This is the name of your VPS to help you and staff to identify the VPS on your...

HOW TO: Installing Windows on a KVM VPS

Installing Windows on a KVM requires the virtio drivers to be loaded. By default, the virtio...

HOW TO: Installing an OS on a KVM VPS

Here's a quick and easy guide to installing an OS on your new KVM VPS from an ISO: Open up...

HOW TO: Fix blank screen in VNC console

If you open the VNC console and are greeted with a blank screen with no error, click your mouse...

Wyvern (Un)Mount ISO Page (KVM)

Boot Device - This lets you switch the primary boot device between CD-ROM (ISO) and the disk...